8/15/2023 1:06:16 AM CheckForRewasdFirmwareVersion: port COM4 8/15/2023 1:06:17 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:06:17 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:06:18 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:06:19 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:06:20 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:06:21 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:06:21 AM WriteFile failed 8/15/2023 1:06:22 AM WriteFile failed 8/15/2023 1:06:22 AM WriteFile failed 8/15/2023 1:06:23 AM WriteFile failed 8/15/2023 1:06:23 AM CheckForRewasdFirmwareVersion: Current device has not Rewasd firmware. 8/15/2023 1:06:23 AM Try to close port COM4 8/15/2023 1:06:32 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex firmware for GIMX file was chosen. 8/15/2023 1:06:32 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_ESP32_1_05.zip firmware for ESP32 file was chosen. 8/15/2023 1:06:32 AM SetFirmwarePath: firmware for ESP32S2 file was chosen. 8/15/2023 1:06:32 AM StartAvrdude: AVR boot loader appeared on COM4 port. 8/15/2023 1:06:32 AM StartAvrdude: Arguments: -p atmega32u4 -c avr109 -P COM4 -D -U flash:w:"C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex":i 8/15/2023 1:06:32 AM ExecTool: Write firmware process started. 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM Connecting to programmer: . 8/15/2023 1:06:35 AM Found programmer: Id = "CATERIN"; type = S 8/15/2023 1:06:35 AM Software Version = 1.0; No Hardware Version given. 8/15/2023 1:06:35 AM Programmer supports auto addr increment. 8/15/2023 1:06:35 AM Programmer supports buffered memory access with buffersize=128 bytes. 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM Programmer supports the following devices: 8/15/2023 1:06:35 AM Device code: 0x44 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM avrdude.exe: AVR device initialized and ready to accept instructions 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM Reading | ################################################## | 100% 0.00s 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM avrdude.exe: Device signature = 0x1e9587 (probably m32u4) 8/15/2023 1:06:35 AM avrdude.exe: reading input file "C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex" 8/15/2023 1:06:35 AM avrdude.exe: writing flash (5492 bytes): 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM Writing | ################################################## | 100% 0.43s 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM avrdude.exe: 5492 bytes of flash written 8/15/2023 1:06:35 AM avrdude.exe: verifying flash memory against C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex: 8/15/2023 1:06:35 AM avrdude.exe: load data flash data from input file C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex: 8/15/2023 1:06:35 AM avrdude.exe: input file C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex contains 5492 bytes 8/15/2023 1:06:35 AM avrdude.exe: reading on-chip flash data: 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM Reading | ################################################## | 100% 0.06s 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM avrdude.exe: verifying ... 8/15/2023 1:06:35 AM avrdude.exe: 5492 bytes of flash verified 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF) 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM avrdude.exe done. Thank you. 8/15/2023 1:06:35 AM 8/15/2023 1:06:35 AM StartAvrdude: Write firmware process finished successfully. 8/15/2023 1:06:35 AM Try to open port COM4 8/15/2023 1:06:35 AM Failed to open port COM4 8/15/2023 1:06:35 AM Try to close port COM4 8/15/2023 1:06:35 AM Try to close port COM4 8/15/2023 1:10:03 AM Try to open port COM4 8/15/2023 1:10:04 AM Try to init port COM4 8/15/2023 1:10:04 AM CheckForRewasdFirmwareVersion: port COM4 8/15/2023 1:10:04 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:10:05 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:10:06 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:10:06 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:10:07 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:10:08 AM ReadFile failed 8/15/2023 1:10:08 AM CheckForRewasdFirmwareVersion: ReadFile return 0 8/15/2023 1:10:08 AM WriteFile failed 8/15/2023 1:10:09 AM WriteFile failed 8/15/2023 1:10:09 AM WriteFile failed 8/15/2023 1:10:10 AM WriteFile failed 8/15/2023 1:10:10 AM CheckForRewasdFirmwareVersion: Current device has not Rewasd firmware. 8/15/2023 1:10:10 AM Try to close port COM4 8/15/2023 1:10:15 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex firmware for GIMX file was chosen. 8/15/2023 1:10:15 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_ESP32_1_05.zip firmware for ESP32 file was chosen. 8/15/2023 1:10:15 AM SetFirmwarePath: firmware for ESP32S2 file was chosen. 8/15/2023 1:10:15 AM StartAvrdude: AVR boot loader appeared on COM4 port. 8/15/2023 1:10:15 AM StartAvrdude: Arguments: -p atmega32u4 -c avr109 -P COM4 -D -U flash:w:"C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex":i 8/15/2023 1:10:15 AM ExecTool: Write firmware process started. 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM Connecting to programmer: . 8/15/2023 1:10:17 AM Found programmer: Id = "CATERIN"; type = S 8/15/2023 1:10:17 AM Software Version = 1.0; No Hardware Version given. 8/15/2023 1:10:17 AM Programmer supports auto addr increment. 8/15/2023 1:10:17 AM Programmer supports buffered memory access with buffersize=128 bytes. 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM Programmer supports the following devices: 8/15/2023 1:10:17 AM Device code: 0x44 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM avrdude.exe: AVR device initialized and ready to accept instructions 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM Reading | ################################################## | 100% 0.00s 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM avrdude.exe: Device signature = 0x1e9587 (probably m32u4) 8/15/2023 1:10:17 AM avrdude.exe: reading input file "C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex" 8/15/2023 1:10:17 AM avrdude.exe: writing flash (5492 bytes): 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM Writing | ################################################## | 100% 0.42s 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM avrdude.exe: 5492 bytes of flash written 8/15/2023 1:10:17 AM avrdude.exe: verifying flash memory against C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex: 8/15/2023 1:10:17 AM avrdude.exe: load data flash data from input file C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex: 8/15/2023 1:10:17 AM avrdude.exe: input file C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex contains 5492 bytes 8/15/2023 1:10:17 AM avrdude.exe: reading on-chip flash data: 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM Reading | ################################################## | 100% 0.06s 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM avrdude.exe: verifying ... 8/15/2023 1:10:17 AM avrdude.exe: 5492 bytes of flash verified 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF) 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM avrdude.exe done. Thank you. 8/15/2023 1:10:17 AM 8/15/2023 1:10:17 AM StartAvrdude: Write firmware process finished successfully. 8/15/2023 1:10:17 AM Try to open port COM4 8/15/2023 1:10:18 AM Failed to open port COM4 8/15/2023 1:10:18 AM Try to close port COM4 8/15/2023 1:10:18 AM Try to close port COM4 8/15/2023 1:13:13 AM Try to open port COM4 8/15/2023 1:13:13 AM Try to init port COM4 8/15/2023 1:13:13 AM CheckForRewasdFirmwareVersion: port COM4 8/15/2023 1:13:14 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:13:15 AM CheckForRewasdFirmwareVersion: ReadFile return 1 8/15/2023 1:13:15 AM WriteFile failed 8/15/2023 1:13:16 AM WriteFile failed 8/15/2023 1:13:16 AM WriteFile failed 8/15/2023 1:13:17 AM WriteFile failed 8/15/2023 1:13:17 AM WriteFile failed 8/15/2023 1:13:18 AM WriteFile failed 8/15/2023 1:13:18 AM WriteFile failed 8/15/2023 1:13:19 AM WriteFile failed 8/15/2023 1:13:19 AM CheckForRewasdFirmwareVersion: Current device has not Rewasd firmware. 8/15/2023 1:13:19 AM Try to close port COM4 8/15/2023 1:13:26 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex firmware for GIMX file was chosen. 8/15/2023 1:13:26 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_ESP32_1_05.zip firmware for ESP32 file was chosen. 8/15/2023 1:13:26 AM SetFirmwarePath: firmware for ESP32S2 file was chosen. 8/15/2023 1:13:26 AM StartAvrdude: AVR boot loader appeared on COM5 port. 8/15/2023 1:13:26 AM StartAvrdude: Arguments: -p atmega32u4 -c avr109 -P COM5 -D -U flash:w:"C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex":i 8/15/2023 1:13:26 AM ExecTool: Write firmware process started. 8/15/2023 1:13:51 AM Error: Thread was interrupted from a waiting state. 8/15/2023 1:13:51 AM StartAvrdude: Write firmware process finished with errors! 8/15/2023 1:13:51 AM Try to open port COM4 8/15/2023 1:13:52 AM Failed to open port COM4 8/15/2023 1:13:52 AM Try to close port COM4 8/15/2023 1:13:52 AM Try to close port COM4 8/15/2023 1:14:12 AM Try to open port COM4 8/15/2023 1:14:12 AM Failed to open port COM4 8/15/2023 1:14:12 AM Try to close port COM4 8/15/2023 1:14:16 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex firmware for GIMX file was chosen. 8/15/2023 1:14:16 AM SetFirmwarePath: C:\Program Files\reWASD\\firmware\REWASD_ESP32_1_05.zip firmware for ESP32 file was chosen. 8/15/2023 1:14:16 AM SetFirmwarePath: firmware for ESP32S2 file was chosen. 8/15/2023 1:14:16 AM StartAvrdude: AVR boot loader appeared on COM4 port. 8/15/2023 1:14:16 AM StartAvrdude: Arguments: -p atmega32u4 -c avr109 -P COM4 -D -U flash:w:"C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex":i 8/15/2023 1:14:16 AM ExecTool: Write firmware process started. 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM Connecting to programmer: . 8/15/2023 1:14:19 AM Found programmer: Id = "CATERIN"; type = S 8/15/2023 1:14:19 AM Software Version = 1.0; No Hardware Version given. 8/15/2023 1:14:19 AM Programmer supports auto addr increment. 8/15/2023 1:14:19 AM Programmer supports buffered memory access with buffersize=128 bytes. 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM Programmer supports the following devices: 8/15/2023 1:14:19 AM Device code: 0x44 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM avrdude.exe: AVR device initialized and ready to accept instructions 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM Reading | ################################################## | 100% 0.00s 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM avrdude.exe: Device signature = 0x1e9587 (probably m32u4) 8/15/2023 1:14:19 AM avrdude.exe: reading input file "C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex" 8/15/2023 1:14:19 AM avrdude.exe: writing flash (5492 bytes): 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM Writing | ################################################## | 100% 0.42s 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM avrdude.exe: 5492 bytes of flash written 8/15/2023 1:14:19 AM avrdude.exe: verifying flash memory against C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex: 8/15/2023 1:14:19 AM avrdude.exe: load data flash data from input file C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex: 8/15/2023 1:14:19 AM avrdude.exe: input file C:\Program Files\reWASD\\firmware\REWASD_GIMX_1_03.hex contains 5492 bytes 8/15/2023 1:14:19 AM avrdude.exe: reading on-chip flash data: 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM Reading | ################################################## | 100% 0.06s 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM avrdude.exe: verifying ... 8/15/2023 1:14:19 AM avrdude.exe: 5492 bytes of flash verified 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF) 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM avrdude.exe done. Thank you. 8/15/2023 1:14:19 AM 8/15/2023 1:14:19 AM StartAvrdude: Write firmware process finished successfully. 8/15/2023 1:14:19 AM Try to open port COM4 8/15/2023 1:14:19 AM Failed to open port COM4 8/15/2023 1:14:19 AM Try to close port COM4 8/15/2023 1:14:19 AM Try to close port COM4