Remapping doesn't work for me?

[xw33b]

Remapping doesn't work at all for me.

I tried some config profiles provided (fortnite mouse aim assist), and nothing works. it seems like it never actually remaps.

For example:

As a test to make sure it wasn't a game related issue - I remapped W on key press to Push Escape

Doesn't work.

Any ideas why it isn't working for me?

[Star-Lord]

Hello,
Thank your questions.

It may be a chance that devices initialization is not completed correctly. Please follow these steps:

1. Ungroup the Keyboard and Mouse, so all the devices are shown separately in the bottom left corner of the main window.
2. Use Detection mode to find the correct Keyboard. If you press the mouse button but see a keyboard in reWASD, then you will need to re-initialize it (from the context menu of an active device): https://help.rewasd.com/interface/device-detection.html
3. After you are sure about all the devices, please group Mouse and Keyboard and try to Apply your config and test it out the game. Use embedded joy.cpl utility - https://streamable.com/ji049v
Use the Lwin button to bring your mouse back to move.

Also, make sure that the Advance mapping feature is active - https://prnt.sc/rx6rwb

[xw33b]

Hello,
Thank your questions.

It may be a chance that devices initialization is not completed correctly. Please follow these steps:

1. Ungroup the Keyboard and Mouse, so all the devices are shown separately in the bottom left corner of the main window.
2. Use Detection mode to find the correct Keyboard. If you press the mouse button but see a keyboard in reWASD, then you will need to re-initialize it (from the context menu of an active device): https://help.rewasd.com/interface/device-detection.html
3. After you are sure about all the devices, please group Mouse and Keyboard and try to Apply your config and test it out the game. Use embedded joy.cpl utility - https://streamable.com/ji049v
Use the Lwin button to bring your mouse back to move.

Also, make sure that the Advance mapping feature is active - https://prnt.sc/rx6rwb

Thanks for the reply. I've redone the device initialization.

It is working now. I will definitely purchase a license once trial has finished!