Announcement

Collapse
No announcement yet.

Make a button also toggle off another button that is currently toggled on.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Badibbou
    replied
    (OP here) I understand why this feature is still being researched by users after all those years. In any FPS where you can scope/zoom, that would be a game changer in terms of comfort. Only having to long press aim button once (often an LT back controller button), it goes into scope, then no need to stay pressed on it, we can aim as long as we want while it stays in scope. As soon as we touch any other button (except from moving and shooting obviously) it would automatically unscope. It would save players from hours and hours of needlessly pressing against the zoom button and would avoid many cramps to our fingers. Great QoL that would be. Dunno if it's technically possible, but hopefully one day.

    Leave a comment:


  • Miron4ik42
    replied
    There is no any news no

    Leave a comment:


  • DANIELE
    replied
    Hi, this is a function I miss from all the native software I'm using and it would be a very appreciated one. Is there any news about it? I'm trying the demo and from what I see it seems it is still not possible to do it.

    Thank you.

    Leave a comment:


  • 1ncorrect
    replied
    Originally Posted by phixate View Post
    I too would like to deactivate toggles based on alternative inputs. For example, I set my A button to repeat press in a combo with toggle enabled. When I go into my select menu without turning it off it causes all kinds of problems. I would like to disable the A button toggle whenever I either hit the A button again or push the select menu button.
    We have this in our plans, but it is still difficult to talk about the approximate timing of implementation.

    However, your vote has been taken into account. Thank you for your suggestion.

    Leave a comment:


  • phixate
    replied
    I too would like to deactivate toggles based on alternative inputs. For example, I set my A button to repeat press in a combo with toggle enabled. When I go into my select menu without turning it off it causes all kinds of problems. I would like to disable the A button toggle whenever I either hit the A button again or push the select menu button.

    Leave a comment:


  • wookiepediologist
    replied
    We appreciate the suggestion. It is noted for sure, I think we will find some solution

    Leave a comment:


  • emergency snacks
    replied
    So this is mostly just a QoL request for an alternative way to easily disable and reenable toggles specifically regarding automovement in games.

    I'm using a mouse thumb button (mouse numpad8) to activate the toggle. Ideally I just want to be able to alternatively deactivate the toggle which is holding down the W key by simply pressing/holding the W key again.

    So basically, instead of being forced to press the mouse thumb button to stop the toggle and then haveing to follow up with pressing/holding W key after that to resume moving forward, I simply want to just be able to press or hold the W key again to deactivate the toggle and continue running forward manually.

    Switching to another layer to potentially facilitate this was suggested by wookiepediologist, but I wasn't able to get it to do what I was seeking.

    1. When switching layers the game minimizes regardless if notifications are on or off.

    2. After enabling the W toggle on layer 1, and then switching to main config layer 0 with W when I want to deactivate the toggle, it switches to main configuration with no way to stop the toggle unless I switch back to layer 1 and press mouse numpad8

    3. Not having a way to switch the layer back and use the toggle in the same keypress (I need to be able to switch the layer and have it fire the command to activate the toggle in the layer 2 simultaneously when I want to reactivate the autorun)

    4. I'm still learning the program so there's probably things I'm not doing correctly, layers and slots seem a little overcomplicated for what I'm trying to do with it, but I'm a noob lol.

    Some of the upcoming features wookie described seem like they might provide solutions to 2 and 3. Thank you.

    Leave a comment:


  • reWASDer
    replied
    Originally Posted by emergency snacks View Post
    Oh right on. If there was an option like that for shift layer shifting to de-activate pressed buttons, and I'm then after able to shift layer switch back to layer 2 and run a toggle W command at the same time all from a single mouse button press, that could effectively work as a solution to the kind of auto run toggle I'm looking for. Thank you.
    Hey there! I may need a clarification here to fully understand your request:

    1. You are using Toggle option in reWASD (which lets you tap the button once to get it pressed until you press it again)? And you want it to be stopped when you switch to another layer?
    In this case, please consider using Slots. Once you switch to a new slot (with a new config), all toggled mappings will stop.

    2. Or maybe you are talking about the button that is physically pressed?

    Leave a comment:


  • emergency snacks
    replied
    Oh right on. If there was an option like that for shift layer shifting to de-activate pressed buttons, and I'm then after able to shift layer switch back to layer 2 and run a toggle W command at the same time all from a single mouse button press, that could effectively work as a solution to the kind of auto run toggle I'm looking for. Thank you.

    Leave a comment:


  • wookiepediologist
    replied
    We are working on a feature that will make the release of all pressed buttons, once the shift layer is switched.
    Switching the shift layer will release the button press in case another mapping is assigned in another shift layer.

    Also, slots feature allows you to change configs on-fly. And there might be one key responsible for switching the slot. Just pay your attention that each slot requires its own config applied to it.
    Please check this article for the details.

    Global profile is also one of our planned features, but no ETA for now.

    Leave a comment:


  • emergency snacks
    replied
    Interesting, thank you. Hmm, shifting layers doesn't seem to help in this situation as I just end up with a different layer with the same toggle still active from the previous layer, and then I can't disable the toggle because the num8 mouse bind I used to activate it isn't registered on that 2nd layer.

    Unfortunately, the turn remap off command just minimizes the game and turns the entire remap off, requiring me to manually re-enable it in the rewasd app. I disabled notifications to try and stop it from minimizing the game but it still happens. Even if there's a fix for that, having to manually re-enable the entire remap every time is not practical for an ingame automovement solution.

    Not sure if shift layer commands would smooth out the issue as well, but big ups on developing this handy app more either way.

    What I basically need is a de-activator key option for rewasd mapping toggles that can be used to de-activate remap toggles in addition to the button used to activate them.

    I have a AHK script that performs this way, but that app has it's own set of bugs and limitations, such as often having to press activator buttons twice in games to get them to fire.
    Attached Files

    Leave a comment:


  • wookiepediologist
    replied
    Such action can be performed by switching the Shift layer for your device.
    e.g. in Shift0 you have the remapped keys, but switching to another Shift Layer will make your keys to work as normal.

    Please check this article for more information about the Shift Layers.

    Also, there is a possibility to assign turning the remap off command to any button or combination of buttons you want. 'Turn remap OFF' is a command, available in the list of all the mappings.

    Another thing we are working on, it was already mentioned in this topic, is making the shift layer to work as commands. So you can assign different actions of Shift mode to different keys. Stay tuned for updates on that feature
    Attached Files

    Leave a comment:


  • emergency snacks
    replied
    Currently the only way to deactivate an active remap toggle is to press the same button that activated it, ctrl+alt+delete, or the controller button combo method? It would be really nice if there was options for other ways to override/deactivate an active remap toggle.

    For example, being able to press keyboard W or some other customizable button to deactivate a mouse button remap that is toggling W for automoving forward.

    Basically, being able to go from mouse remap automoving to deactivating it and manually moving forward by pressing and holding the W key on the keyboard would be some really nice QoL.

    Leave a comment:


  • Support Agent
    replied
    Originally Posted by RafaARV View Post
    I'm also looking for something similar. It will be good to be able to completely change of shift (let's say 0 to 1) at the point you can remap the key (let's say "B") that you used to reach that shift ("1" in this case) and then, of course, use that same key ("B" in this case) to do something completely different in the new shift, let's say execute another key combo or change to another shift (e.g. "2") that is not just returning to the old one ("0").
    Something similar is planned for version 6.0. ETA: late December.

    Leave a comment:


  • RafaARV
    replied
    I'm also looking for something similar. It will be good to be able to completely change of shift (let's say 0 to 1) at the point you can remap the key (let's say "B") that you used to reach that shift ("1" in this case) and then, of course, use that same key ("B" in this case) to do something completely different in the new shift, let's say execute another key combo or change to another shift (e.g. "2") that is not just returning to the old one ("0").

    Leave a comment:

Working...
X