Announcement
Collapse
No announcement yet.
Azeron 1.2.5 Software and Firmware update bug
Collapse
X
-
Hello,
Correct me if I'm wrong, but I believe 76a is for the Teensy board? I have a Tansy board, which did roll back to 81b (from 82b) when I performed a clean re-install back to 1.2.4.
Thanks,
- Flag
Leave a comment:
-
Have you tried installing both versions of the firmware?
Try to install 76a, please.
- Flag
Leave a comment:
-
After perfoming a clean reinstall of Azeron software v1.2.4, the device still exhibits the same behavior if: I turn off reWASD; open Azeron app; close Azeron app, turn on reWASD.
- Flag
Leave a comment:
-
Thanks for the suggestion! I spoke to Azeron and they advised me to not rollback my firmware for my Tansy board. They advised that v1.2.4 and v1.2.5 both use firmware 82b.
They have suggested to perform a clean reinstallation of the software. I will let you know what happens.
Thanks
- Flag
Leave a comment:
-
-
I'm re-installing the Azeron software using an old installer that I saved.
Apologies, but upon further investigations, those 2 combinations (1.2.5 and 6.5.0; 1.2.4 and 6.5.1) also exhibit the same issue in the Youtube link I posted in one of my recent previous posts (for some reason, I cant edit my previous posts).
- Flag
Leave a comment:
-
Could you please clarify, are you reinstalling the Azeron software using the old installer or somehow rolling back the update?
You mentioned earlier that everything worked for you with previous software versions.
- Flag
Leave a comment:
-
Thanks for the update, do you happen know which version? I rolled back to Azeron 1.2.4 but this issue also persists... which is strange. I don't remember this being an issue prior to updating my Azeron software to 1.2.5.
There was a week when I left my profile as the WASD movement profile. Every time I would restart my PC (which I guess would inherently close and re-open reWASD), this never happened.
Thanks!
- Flag
Leave a comment:
-
Hey there!
We have rechecked this issue on our side, it's related to the Azeron software, and we have notified them about it.
As a temporary solution, you can install the previous version of the software.
- Flag
Leave a comment:
-
Thanks, I also have attached a video file of my desktop recording to show it in action. In the video, I am not touching my Azeron Cyborg at all until the 53 second mark:
- Flag
Leave a comment:
-
Thanks for all the information provided.
We will check it from our end and get back to you as soon as there is news.
- Flag
Leave a comment:
-
Per this Reddit thread (https://www.reddit.com/r/rewasd/comm...g_with_rewasd/), attaching my Config file for Battlefield 2042. It has mapped keyboard WASD to the movement joystick and L Shift to the center click (for sprint).Attached Files
- Flag
Leave a comment:
-
To add on my most recent post: It looks like this only happens when i Turn Remap Off then turn it back on.
- Flag
Leave a comment:
-
Alright last update for now I guess, the bug started to happen again even with Azeron 1.2.5 and ReWASD 6.5.0.
I updated everything (Azeron 1.2.5 and ReWASD 6.5.1) and it looks like the only way I can make the issue go away is to select an Xbox input profile, move the joy stick around for a second. Then switch to a WASD movement profile.
Weird stuff, idk anymore.
- Flag
Leave a comment:
Leave a comment: