The Vader 4 Pro... Any updates?

[halolma]

Hi guys,

I was wondering if you had any updates in regards to the FlyDigi Vader 4 PRO controller? I asked back in July if it will be supported, but was hoping you had some updates. Especially since I was having issues with it on ReWASD for Gray Zone Warfare.


Thanks,
H.

[1ncorrect]

Hello.

We hope that support will appear in one of the upcoming updates.

[halolma]

Okay cool! Much appreciated for the reply.

Thanks.

[KaiZas]

Oooh, great news! My Vader4 Black Flag edition has been sitting on the corner of my desk, totally neglected.

[RAM Stealer]

Hello! We have added Vader 4 Pro support in the last update 9.0.

[halolma]

Nice one!!

[KaiZas]

Ok, but eh... what black magic do I need to perform for it to work?

I've uninstalled, sacrificed all my profiles and settings for a clean install, it's still not detecting the Vader4 at all. Not wires, not using the dongle. The controller is in dinput mode (blue led on top).

Am I missing something?

[strokel]

Hi KaiZas, answered in DM.

[Meltsun]

Hi @strokel

I’m experiencing the same issue as KaiZas. Whether I connect the controller via Bluetooth or the dongle, reWASD always recognizes the device as an Xbox controller instead of specifically identifying it as a Vader4 controller.

Could you please share any advice or steps to resolve this issue?

[strokel]

Hi Meltsun, answered in DM.

[Timujen1]

Lifetime License here, but having the same issues with Vader4 Pro as the others. I guess I need help as well.

[Kapas]

Hi, Timujen1. To connect your Flydigi Vader 4 Pro, switch it to Android Mode (check the manual for the button combo). Then, in reWASD, go to Preferences > General > Clear Data to reset settings. Reconnect the controller, and it should be properly detected.

[Timujen1]

Hi Kapas , Thanks for the assist. However-

There are three possible settings of the rear switch (Dongle, Bluetooth, and NS)
The only connection I'm able to achieve is with the Dongle.

On the Dongle setting, I can chose O+A, or O+X.
O+X sees only an X360 controller, O+A has no response.

I tried to Clear Data before connecting with each setting.

[strokel]

Hi Timujen1, answered in DM.