Rewasd doesn't recognize L and R inputs when using the Wavebird + mayflash adapter

[Duke91]

I set the adapter to wii u mode as the program says, it does recognize every button, except for L and R, sometime when I restart the PC and/or disconect/reconnect the adapter, it will recognize L R inputs, most of the time it won't. Tested with 4 different controllers/receptors and the results are always random.

[strokel]

Hey there!

Unfortunately, reWASD does not support this controller, so there may be some issues with its functionality.

Please send us a screenshot showing how this device appears in reWASD (hover the cursor over it among the devices listed at the bottom of the interface).
Also, please send us a screenshot of how this device appears in joy.cpl.

[Duke91]

Hey there!

Unfortunately, reWASD does not support this controller, so there may be some issues with its functionality.

Please send us a screenshot showing how this device appears in reWASD (hover the cursor over it among the devices listed at the bottom of the interface).
Also, please send us a screenshot of how this device appears in joy.cpl.

The device appears as a normal gamecube controller, wavebird is basically the wireless version of the gc controller, Rewasd does detect the mayflash GC adapter (it even tells you to switch to wii u mode for it to work, instead of the pc/direct input mode), the only problem is that it doesn't detect the L and R inputs most of the time, every other button are detected, but L R most of the time doesn't work, or only 1 of the buttons work. In joy.cpl the controller does not appear unless remap function is enabled, which will show as an xinput, etc

[Duke91]

Edit: the wired gamecube controller also has problems with L/R being detected, just less common than the wireless version

[strokel]

Please specify the exact model of your controller and provide a link to it.
Also, please clarify if this issue occurs without reWASD when using any other remapping software.

[Duke91]

I added some images of the controller, adapter, and how it appears on rewasd. As for how it works without rewasd, it works perfectly fine on dolphin for instance, don't know any other remapping software for it

[Support Agent]

Please provide a link to this controller manufacturer or reseller.

[Duke91]

Please provide a link to this controller manufacturer or reseller.

https://www.ebay.com/itm/135433118677?_skw=gamecube+wavebird+controller&itmmeta=01JGF19467DPM185MNYRVVAKPA&hash=item1f887163d5:g:IuYAAOSwO6FnWBTA&itmprp=enc%3AAQAJAAABAHoV3kP08IDx%2BKZ9MfhVJKmzz1oY3URu09HAeSTorppc2O4avZwoCOdPsMS6HIehPVVgHKgRL%2F83B0funMnhckAsvCNaqj3b8pFdDymjC9f6Nk06lmCN32%2B6uD9Y51%2BxmrSF3jGr2ZbiT0GvUq862FLof3p0doWVwcTSeKYzJMy%2BtlJuppETQAFVxJ6zN2FWH6z88Zpjm7GogU8Gjc6LcoFWl38Ludo4Ar9Z6iExGku9h80oAiz0osU2oJTqO%2BAtLE54oz179KLIMxGbyHU%2Butx8ueOAagQ%2FfRMPnjF5mijNlN1%2BkaUdi0heWdtAwqnHuoPj2ifg1z2A%2Bt6MxQwh2Ac%3D%7Ctkp%3ABk9SR5rDpOGDZQ

just look on ebay you'll find a lot of resellers, manufacturer is nintendo, and AFAIK they don't make new ones since the end of gamecube life

https://en.wikipedia.org/wiki/WaveBird_Wireless_Controller