Supported devices

[strokel]

Hi notabug

Please contact us with this request by email at [help@rewasd.com].

[notabug]

Could I make a request to add support for the Thunderobot G50S?

[strokel]

You're welcome.
Should you have any other questions or require further assistance, please let us know.

[Equivocal6844]

I see well thanks anyways

[strokel]

Unfortunately, this cannot be fixed from the reWASD side as it is normal behavior of this controller.

[Equivocal6844]

That shouldn't be the case either because I have the dualsense disconnected (deleted bluetooth device on ps5 and the ps5 turned off).

[strokel]

If we understand correctly and the mappings within the PC are working properly, and your controller is still connected to your console, then switching profiles is normal and not related to reWASD. In your case, the solution would be to disconnect the controller from the console.

[Equivocal6844]

I know that the default profile must be set to use rewasd on the fn keys, and I have already done so.

I can assign fn as a shift layer key and any other keys(dpad, etc) to keyboard mappings and get the desired keyboard key as an output.

For example, if I assign shift layer key to fn and keyboard key 'f' on the down key and press these buttons I get 'f' as an output.
On the otherhand, when I use assign shift layer for fn and keyboard key 'f' square and press these buttons, there is no output and my custom profiles set on the playstation will change.

It maybe that somehow my dualsense edge is faulty, but I think it's more than likely that the profile switch key combinations on the dualsense edge are not disabled when using rewasd and will interfere with rewasd outputs.

I have my controller profiles on playstation 5 set as the default profile, tried it with 3 additional profiles and tried after deleting all of my custom profiles(only the default profile left) just to make sure that my profiles on the playstation are not the issue.
I am also using the dualsense to emulate an xbox360, mouse(right thumbstick, back buttons) and keyboard(layers) if this info also helps.

Hope this clarifies!

[strokel]

DualSense Edge must be connected to a PS5 in order to use the Fn + X, O, Triangle, Square buttons with reWASD.
When connecting the gamepad to the PS5, it is important to initialize the default profile for correct use. More information can be found by following the link.

[Equivocal6844]

Fn with either square, triangle, circle, or cross are profile changing key combinations on the dualsense edge.
I want to remap these key combinations using rewasd but it seems like the dual sense edge has playstation profiles saved onto the device and have the priority of running even after remapping these key combinations through rewasd.

I'm trying to use fn as a shift layer key and square, triangle, circle, and cross as keyboard buttons on the shifted layer.
The expected outcome is that I get keystrokes for these combinations(eg. fn+triangle).What I actually get is a profile change on the dualsense edge(not rewasd).

Hope this can be fixed!

[strokel]

Hi. Could you please clarify how your issue is related to reWASD? Also, we would appreciate it if you could send a video showing your issue.

[Equivocal6844]

I think there's an issue with the Dualsense Edge where pressing the fn key in combination with the either the square, triangle, circle, cross buttons causes the Dualsense Edge to change profiles on pc. Any plans on fixing this?

[strokel]

Hi heathhollow9

There may be support for this controller in the future; however, we do not have an ETA.
If such a device is supported, we will announce it.

We are trying to add support for new devices with every big update, so stay tuned!

[heathhollow9]

Is there a plan to add the Gulikit kk3 max controller to the rewasd?

[1ncorrect]

Any chance to support racing wheels? I have a logitech g27, wich I need to remap to a xbox controller and it is not detected by rewasd
Thanks

Hey there!
We have provided an answer to your question in this thread.