Web Home, Web Search not UNMAPPING on 5.3?

[Star-Lord]

Hi there,

Great news! Thank you for your feedback, glad that everything is working.

[saberX]

I can confirm that it is working now. Thank You for the update. Regards.

[reWASDer]

Hello saberX

Thanks again for pointing us to the issue with consumer keys. It is fixed in reWASD 5.6 that is out now.
You can learn more about this update from this post.

[Star-Lord]

Hello,
Thank you for your cooperation! We will check the logs out and back to you with updates.

[saberX]

8. Open the cmd again after the PC reboot. Do the same steps to run StartLog.bat again. Open the installed reWASD to reproduce the reported above problem.

This step ( THE REPORTED PROBLEM) is happening to me after I restart my PC again , so not right after the restart that reWASD instalation requires, but the next PC restart i have ( for whatewer reason).
So I've sent the logs on the email from README with these steps;

0_vs5.5.1.uninstalling.zip (logfile name) > Started the log before uninstalling 5.5.1, then stopped it after it finished uninstalling but before rebooting the PC.
1_vs5.5.0.first_restart.zip (logfile name) > Started the log after installing 5.5.0 and rebooting my PC once ( so first restart after the 5.5.0 installation) , and stopped after i entered reWasd , added a device and assigned a profile.
2_vs5.5.0.second_restart.zip (logfile name) > Started after the second pc restart, when the problem with the driver kicked in. After I started the logs, I tried opening reWasd, then the prompt for the driver came in and not being able to install the driver after the prompt, reWasd closed. Then I stopped the logs.
Finally, the setupapi.dev.log requested by You is also attached.
Regards.

[Star-Lord]

Hello,
Thank you for your feedback.

- May I ask you to send us C:\Windows\inf\setupapi.dev.log file that we could check uninstallation logs.

- Also, we would appreciate it if you would help us to collect some logs of the 5.5.0 installation. The steps are the following:

1 Extract "reWASDLogging_tracelog.zip" archive we shared with the link.
2. Open cmd via Administrator and navigate to a directory where reWASDLogging was extracted. You will be able to see two files(StartLog.bat and StopLog.bat).
3.Type StartLog.bat
4. Start removing the 5.5.1 version.
5. Type StopLog.bat in cmd, when it's requested to reboot the PC. Open the directory and copy the log archive to another directory. Remove the log.zip and log folder in the reWASDLogging folder.
6. Reboot the PC.
7. Boot the PC. Install the 5.5.0 version. The reboot will be required again, so reboot it.
8. Open the cmd again after the PC reboot. Do the same steps to run StartLog.bat again. Open the installed reWASD to reproduce the reported above problem.
9. Once the error messages reproduced back to the cmd and type StopLog.bat.
10. Open reWASDLogging and copy the archive the same directory where the first log was copied before the PC reboot.
11. Send us archives for the investigating.

Important to collect the log of reWASD removing before the PC reboot and the log when reWASD is launched after the reboot.

Sorry for the longread and I will understand if you prefer to wait a major fix. But it will help is if there is a problem.

[saberX]

I just gave up. I couldn't make the downgrade properly no matter what, Safe Mode, no antivirus etc. I installed the latest version again. For now, I will deal with those buttons not working/remapping until the next version is up.

[Star-Lord]

Hello,
Thank you for your feedback.

Strange behavior, it seems that the uninstaller doesn't remove the driver during the software uninstallation, this is why the previous version is not installed properly due to the driver's versions differences. The first thoughts that come up are:

1. Check the windows account permissions (especially C: and set Full control to C:
2. Disable temporary all antiviruses that could prevent or interfere the software removal.
3. Try to remove the reWASD in Safe mode.

Let us know if these steps were helpful.

[saberX]

Guys, any update on the new version? I have major issues after i downgraded 5.5.1 to 5.5.0.
Every time i have to restart my pc, rewasd stops working . I have this message:

http://prntscr.com/usgygp

If I click install, then this is following:

http://prntscr.com/ush0e1

and I cant use the software anymore. I have to Uninstall - reboot - Reinstall - Reboot then is working until the next reboot... then repeat those steps again.
It is really frustrating, since I don't want to use the latest version without those missing Key mappings.
I also tried uninstalling with uninstalling the options,settings,profiles checkmark.
What can I do?

[Star-Lord]

Hello,

Thank you, saberX. The problem is confirmed. Will be fixed next release.

Sorry for the inconvenience.

[saberX]

Hey guys, it seems that those Web ,Home, Menu, Search and Sleep buttons are not working again on reWasd 5.5.1 I downgraded to 5.5.0 and they are working. Is it on my side this time?

[Star-Lord]

Hello,

Glad to inform you that we have released a new reWASD 5,4 version where we fixed the issue with media buttons. The Web Home, Web Search buttons can be unmapped now . Please, updates your current version to 5.4 and try to reproduce the problem.

Let us know any results.

[reWASDer]

Oh, seems our help is a bit late, and it is OK now.

Thanks for letting us know and sorry for the inconvenience

[saberX]

Ok. I need Help please. I uninstalled the 5.3 version without deleting my configs/license etc, restarted my pc, installed 5.2.2, rebooted again. I now have all the configs in place, but i cannot apply any ( remap is always OFF), no matter if i hit apply, hit the "Remap is OFF" button . What i did wrong? Now nothing is working anymore.

LE:
I did a clean install of 5.2.2 ( delete everything license cofig etc, i backed up my profiles folder) , and installed 5.2.2 again and now it is working...phew.

[Star-Lord]

Hello,

Sure, please, login your account, unfold "Download" tab and download the version 5.2.2