PS3 Navigation Controller L-Stick High Mapping Issue

[k3rnel_pan1c]

Hello,

I am trying to map L-Stick High Up to a sprint button.

The issue:
If I set the high zone to 32766, it is triggering the combo at about 80% deflection. Is there a work-around or fix to trigger it at 98% or 100%?

[Support Agent]

98% would be 32113. You should check if your gamepad is actually accurate in that regard: try Gamepad Tester.
If you have any other remappers or a 3rd party gamepad driver installed - you should remove them, as they can interfere with reWASD.

[k3rnel_pan1c]

The Left Stick registers -0.98, -0.99, -1.00 near the end of the travel upwards. I do not think it's the gamepad.

There are no other remappers, drivers, or anything. I already tried cleaning my system, re-installing reWASD and a second controller.

[Support Agent]

What I meant was to check at what actual physical point does that stick go to 1.0.

Though I'm afraid I can't suggest much here anyway. reWASD works with the data that is being sent by the gamepad. If it sends values over 32766 at about 80% deflection, then that's most likely what's happening.

You can try [Clear data] button at [Preferences > General].