Help with LED settings not applying
Hi! I've been using the program for quite a while, but I still have no idea how the LED setting work within specific configs.
I run a standard Windows Home x64 license laptop.
I did try googling and the official documentation, but nothing actually worked, nor I found some specific information I was looking for.
I use PS4 and Dualsense controllers, both support custom LED settings, but they simply do not work. With that I mean, I change settings inside any CONFIG file, and they just don't apply to the controller. There's only ONE that works, I'll show below.
Just to clarify, within the settings/preferences for reWASD, I did make changes specifically for the Dualsense controller, and they did work. And I am aware that the LED settings in any config it's basically a behaviour override from the default one's, configured in the software settings/preferences.
This is how it looks like in the 'default' settings:
I've only changed the default 'Shift 0 Modifier' to a blue hue, and it works in everyconfig file I have.
Then, I try changing it to a green hue when using it to emulate XInput devices (Xbox controllers, basically) and this is how it looks like:
Just to clarify the obvious here, I did try saving, applying, saving and applying, switching configs, reconnecting the device and even switching devices. Nothing worked. When I open the same screen, the LED setting ARE SAVED, I do not need to put the green hue in there again. It's just not working/applying.
With that said, I do have ONE config file forthe Dualsense that does work, and there's only one key difference that I can't seem to find a way to "implement" it to other configurations.
This is the config file for my Genshin Impact controller layout, I use it to be able to use the "interact action" on the touchpad click and allow gyroscope aiming, simple stuff.
The major difference in this config file is that ,as far as I can remeber, this specific config file was the wone created when I added the "Dualsense" profile, in the upper right corner drop down menu. And since it was created, the LED settings button is actually colored, while any other configuration I make inside this profile gets a monochromatic grayscale icon. This also stands true to any other profile I create, for any device. The first config file has a colored icon, while any other gets a gray icon.
After doing some Googling, reading the official documentation, reading this post, I couldn't find any specific information about this. Only generics "How to" tutorials with obvious content for my personal understanding. Nothing about some kind of troubleshooting, or if I am doing something wrong, which I don't feel like I am disregarding the icon coloring, hence why this post asking for help.
It's also completely possible I totally missed the text in any of this pages I mentioned (heck, I could have missed anywhere and everywhere) containing a possible solution, not the brightest person here. If that's the case, my bad ¯\_(ツ)_/¯
Any help is appreciated, I think I provided all the visual and teorical info needed, but if more is necessary, I'll gladly provide.
I run a standard Windows Home x64 license laptop.
I did try googling and the official documentation, but nothing actually worked, nor I found some specific information I was looking for.
I use PS4 and Dualsense controllers, both support custom LED settings, but they simply do not work. With that I mean, I change settings inside any CONFIG file, and they just don't apply to the controller. There's only ONE that works, I'll show below.
Just to clarify, within the settings/preferences for reWASD, I did make changes specifically for the Dualsense controller, and they did work. And I am aware that the LED settings in any config it's basically a behaviour override from the default one's, configured in the software settings/preferences.
This is how it looks like in the 'default' settings:
I've only changed the default 'Shift 0 Modifier' to a blue hue, and it works in everyconfig file I have.
Then, I try changing it to a green hue when using it to emulate XInput devices (Xbox controllers, basically) and this is how it looks like:
Just to clarify the obvious here, I did try saving, applying, saving and applying, switching configs, reconnecting the device and even switching devices. Nothing worked. When I open the same screen, the LED setting ARE SAVED, I do not need to put the green hue in there again. It's just not working/applying.
With that said, I do have ONE config file forthe Dualsense that does work, and there's only one key difference that I can't seem to find a way to "implement" it to other configurations.
This is the config file for my Genshin Impact controller layout, I use it to be able to use the "interact action" on the touchpad click and allow gyroscope aiming, simple stuff.
The major difference in this config file is that ,as far as I can remeber, this specific config file was the wone created when I added the "Dualsense" profile, in the upper right corner drop down menu. And since it was created, the LED settings button is actually colored, while any other configuration I make inside this profile gets a monochromatic grayscale icon. This also stands true to any other profile I create, for any device. The first config file has a colored icon, while any other gets a gray icon.
After doing some Googling, reading the official documentation, reading this post, I couldn't find any specific information about this. Only generics "How to" tutorials with obvious content for my personal understanding. Nothing about some kind of troubleshooting, or if I am doing something wrong, which I don't feel like I am disregarding the icon coloring, hence why this post asking for help.
It's also completely possible I totally missed the text in any of this pages I mentioned (heck, I could have missed anywhere and everywhere) containing a possible solution, not the brightest person here. If that's the case, my bad ¯\_(ツ)_/¯
Any help is appreciated, I think I provided all the visual and teorical info needed, but if more is necessary, I'll gladly provide.
Attached Files
Comment