Virtual Controller keeps looping "connecting, connected" Loop for Nintendo Switch

[Miron4ik42]

You can use reWASD's virtual controller on other PCs, phones, tablets, and consoles that support Bluetooth connection.

[chotulaall7]

Do you mean connecting an external virtual Switch Pro to the console? install vidmate
get-mobdroapk.com

[Lukarbonite]

Following your directions didn't seem to help me, but I did manage to get the external controller to work by uninstalling and then reinstalling the Bluetooth dongles drivers once again. Thanks for the help.

[RAM Stealer]

Hello! Please disconnect all connected Bluetooth devices from the console. Also go to the list of connected Bluetooth devices on the PC and make sure that the console is not connected.
After that, try setting up the external device from the beginning.

[1ncorrect]

Thank you. We will review these logs and get back to you as soon as there is news.

[Lukarbonite]

I found that the sequence is correct and have followed the troubleshooting guide again. It still didn't work so I made the new logs and put them in the shared folder on google drive using the same link as before. https://drive.google.com/drive/folde...fy?usp=sharing

[1ncorrect]

Please double-check that the sequence is correct when creating the External Device.
Also go through the troubleshooting guide again.

If that doesn't help, collect the logs from the steps in our answer above with a new adapter.

The only clarification - when logging, in addition to GUI/Agent logs, also check Service/Driver logs.

[Lukarbonite]

Hello again. I bought the ASUS BT500 and downloaded the newest drivers for it. Now it seems the nintendo switch won't even recognize it. How do I fix this?

[1ncorrect]

You're welcome

We hope that replacing the adapter will solve the issue.

[Lukarbonite]

Okay, thanks. I’ll get check out the Asus BT. I’ll let you know if it doesn’t work. Thanks for the feedback!

[1ncorrect]

Everything is fine with the logs, so it is likely that the issue is in your Bluetooth adapter.
In case you have another adapter - try it.
In general, for such a connection, it is recommended to use adapters with a Broadcom chip.

[1ncorrect]

Thanks for the provided logs.
Our team will check them, and we will contact you as soon as there is news, or if we need more information.

[Lukarbonite]

The permissions are changed.

[1ncorrect]

Please give access.

[Lukarbonite]

Okay thanks! Here is the logs. I wasn't sure which log txt to give since they all have the same date. https://drive.google.com/drive/folde...fy?usp=sharing