Key Combo Help

[IAmOrion]

Not sure if I'm just being blind, but I want to create a key combo that does the following...

On Key Press = Combo: Press 4, Release 4, Press Left Mouse Button + Hold.
On Key Release = Combo: Release Left Mouse Button, Press 1

So I need to be able to "delete" the mouse button up action but keep the mouse button down action. It seems deleting either deletes both

When I use the combo editor, it appears key presses can ONLY be entered as either 1) Holding all or 2) press / release indidually. I could've sworn I *used* to be able to do what I want!

Is this not possible?

[Support Agent]

It is currently impossible to hold some key with one mapping and release it with another. The same goes for Combo.

Using different Activators and Combo should help in your case:

1. remap [Single Press] to Combo in [Hold until release] mode: Pause(5-20ms) > Left Mouse button
2. remap [Start Press] to [4]
3. and [Release Press] to [1]

If 2 and 3 won't work, remap them to Combo in [Execute at once] mode with the delay between keys set to 0 and pause between the press and release nodes of at least 17ms.

[IAmOrion]

Ahh, thanks for the info, I shall give it a go tomorrow and report back if I was able to do what I wanted. Many thanks

[IAmOrion]

I totally forgot to report back BUT this worked perfectly, thanks!

[1ncorrect]

Good news! We are always happy to help.