Originally Posted by DougieDoug
View Post
Announcement
Collapse
No announcement yet.
Meet Enhanced Shift mode & Flydigi controllers in reWASD 6.1!
Collapse
X
-
- Flag
-
Originally Posted by reWASDer View Post
Have you tried the following combo? Once it is set to Turbo, you get both — Turbo for the trigger and continuous right stick motion:
- Flag
Leave a comment:
-
Originally Posted by reWASDer View Post
Hey there! Please re-download the new version from rewasd.com — it should detect your controller now. It turned out that you do have a different Apex 1 version. Would be grateful if you confirm that everything works as it should.
- Flag
- Likes 1
Leave a comment:
-
Originally Posted by vain View Post
Flydigi controllers is firmware upgradeable. I have replaced several firmware versions, and computers. Perhaps there is a difference between Apex1 as well?
- Flag
Leave a comment:
-
Originally Posted by vain View Post
Flydigi controllers is firmware upgradeable. I have replaced several firmware versions, and computers. Perhaps there is a difference between Apex1 as well?
- Flag
Leave a comment:
-
Originally Posted by reWASDer View Post
Thank you. It is OK if the triggers are marked as 9 and 10 in joy.cpl. As for the version, what exactly do you mean? Is it some specific one?
We would be grateful if you collect some logs for us, so we could understand what happens on your side. Here are the steps:- Unplug/disconnect all physical controllers and their adapters, if present.
- Run reWASD as Administrator.
- Open 'Preferences > General', select 'Standard logging' with 'Service/Driver logs' only.
- Click the 'Start log' button and leave 'Preferences'.
- Connect your adapter, then turn the controller on to be sure that it is already working properly
- Go to 'Preferences > General' again and click the 'Stop log' button.
- In the message that will appear, click 'Open file location', find the archive that was created last, and send it to us
Attached Files
- Flag
Leave a comment:
-
Originally Posted by vain View Post
All buttons passed the test. LT&RT shows at 9&10, is this normal?
Do I need to pay attention to the version of the controller?
We would be grateful if you collect some logs for us, so we could understand what happens on your side. Here are the steps:- Unplug/disconnect all physical controllers and their adapters, if present.
- Run reWASD as Administrator.
- Open 'Preferences > General', select 'Standard logging' with 'Service/Driver logs' only.
- Click the 'Start log' button and leave 'Preferences'.
- Connect your adapter, then turn the controller on to be sure that it is already working properly
- Go to 'Preferences > General' again and click the 'Stop log' button.
- In the message that will appear, click 'Open file location', find the archive that was created last, and send it to us
- Flag
Leave a comment:
-
Originally Posted by reWASDer View Post
Got it. Please open the system gamepad tester (type joy.cpl in Windows search and launch the suggested tool). You should see Flydigi there. Please press Properties and then press some buttons on the controller. Do you see highlighted buttons in the tester?
Do I need to pay attention to the version of the controller?
- Flag
Leave a comment:
-
Originally Posted by DougieDoug View Post
I can do that. So, to mimick moving the right stick in a circular motion, enhancing aim assist, i could make a combo RU 4, RR, 4, RD, -4, RL -4, RU 4, RL -4, RU 4, RR 4 and this should be on a turbo so it is continuous. But the way it is now, I'd have to wipe out L2 all together or make a super long combo with L2 before everything in said combo.
- Flag
Leave a comment:
-
Originally Posted by vain View Post
The only way to connect computer to the Apex1 is with the official dongle, no need to wonder.
Apex1 is working fine in 360 mode. After switching to Android mode, reWASD does not show the device. Already check blacklist.
- Flag
Leave a comment:
-
Originally Posted by vain View PostUnrecognizable Flydigi Apex 1 for Android mode "Flydigi 2.4G Android"
- Flag
Leave a comment:
-
Originally Posted by reWASDer View Post
Hey there!
Which connection type do you use? Please note that Apex 1 could be used with an official dongle only in reWASD. Do you use it or something else?
Apex1 is working fine in 360 mode. After switching to Android mode, reWASD does not show the device. Already check blacklist.
- Flag
Leave a comment:
-
Glad to see ARM support, that's one step closer to being able to also support other OSs. Well done!
- Flag
- Likes 1
Leave a comment:
-
Originally Posted by vain View PostUnrecognizable Flydigi Apex 1 for Android mode "Flydigi 2.4G Android"
Which connection type do you use? Please note that Apex 1 could be used with an official dongle only in reWASD. Do you use it or something else?
- Flag
Leave a comment:
Leave a comment: