Meet Enhanced Shift mode & Flydigi controllers in reWASD 6.1!

[reWASDer]

the problem with this, r2 will have to be turbo'd. not a problem for semi auto guns, big problem for automatic guns. same thing if i attach combo to l2, l2 is just aiming down and off rapidly making it hard to kill anybody.

Got your point. Indeed, the only way to make it work right now is too create a long combo. We will take your suggestion into account, thank you for the details!

[DougieDoug]

Have you tried the following combo? Once it is set to Turbo, you get both — Turbo for the trigger and continuous right stick motion:

the problem with this, r2 will have to be turbo'd. not a problem for semi auto guns, big problem for automatic guns. same thing if i attach combo to l2, l2 is just aiming down and off rapidly making it hard to kill anybody.

[1ncorrect]

Thankfully, all is well now.

Good news!
We are always glad to help!

[vain]

Hey there! Please re-download the new version from rewasd.com — it should detect your controller now. It turned out that you do have a different Apex 1 version. Would be grateful if you confirm that everything works as it should.

Thankfully, all is well now.

[reWASDer]

Flydigi controllers is firmware upgradeable. I have replaced several firmware versions, and computers. Perhaps there is a difference between Apex1 as well?

Hey there! Please re-download the new version from rewasd.com — it should detect your controller now. It turned out that you do have a different Apex 1 version. Would be grateful if you confirm that everything works as it should.

[reWASDer]

Flydigi controllers is firmware upgradeable. I have replaced several firmware versions, and computers. Perhaps there is a difference between Apex1 as well?

Thanks! It really looks different according to the log. Will get back to you a bit later once we check it with a team.

[vain]

Thank you. It is OK if the triggers are marked as 9 and 10 in joy.cpl. As for the version, what exactly do you mean? Is it some specific one?

We would be grateful if you collect some logs for us, so we could understand what happens on your side. Here are the steps:

• Unplug/disconnect all physical controllers and their adapters, if present.
• Run reWASD as Administrator.
• Open 'Preferences > General', select 'Standard logging' with 'Service/Driver logs' only.
• Click the 'Start log' button and leave 'Preferences'.
• Connect your adapter, then turn the controller on to be sure that it is already working properly
• Go to 'Preferences > General' again and click the 'Stop log' button.
• In the message that will appear, click 'Open file location', find the archive that was created last, and send it to us

Flydigi controllers is firmware upgradeable. I have replaced several firmware versions, and computers. Perhaps there is a difference between Apex1 as well?

[reWASDer]

All buttons passed the test. LT&RT shows at 9&10, is this normal?
Do I need to pay attention to the version of the controller?

Thank you. It is OK if the triggers are marked as 9 and 10 in joy.cpl. As for the version, what exactly do you mean? Is it some specific one?

We would be grateful if you collect some logs for us, so we could understand what happens on your side. Here are the steps:

• Unplug/disconnect all physical controllers and their adapters, if present.
• Run reWASD as Administrator.
• Open 'Preferences > General', select 'Standard logging' with 'Service/Driver logs' only.
• Click the 'Start log' button and leave 'Preferences'.
• Connect your adapter, then turn the controller on to be sure that it is already working properly
• Go to 'Preferences > General' again and click the 'Stop log' button.
• In the message that will appear, click 'Open file location', find the archive that was created last, and send it to us

[vain]

Got it. Please open the system gamepad tester (type joy.cpl in Windows search and launch the suggested tool). You should see Flydigi there. Please press Properties and then press some buttons on the controller. Do you see highlighted buttons in the tester?

All buttons passed the test. LT&RT shows at 9&10, is this normal?
Do I need to pay attention to the version of the controller?

[reWASDer]

I can do that. So, to mimick moving the right stick in a circular motion, enhancing aim assist, i could make a combo RU 4, RR, 4, RD, -4, RL -4, RU 4, RL -4, RU 4, RR 4 and this should be on a turbo so it is continuous. But the way it is now, I'd have to wipe out L2 all together or make a super long combo with L2 before everything in said combo.

Have you tried the following combo? Once it is set to Turbo, you get both — Turbo for the trigger and continuous right stick motion:

[reWASDer]

The only way to connect computer to the Apex1 is with the official dongle, no need to wonder.
Apex1 is working fine in 360 mode. After switching to Android mode, reWASD does not show the device. Already check blacklist.

Got it. Please open the system gamepad tester (type joy.cpl in Windows search and launch the suggested tool). You should see Flydigi there. Please press Properties and then press some buttons on the controller. Do you see highlighted buttons in the tester?

[DougieDoug]

Unrecognizable Flydigi Apex 1 for Android mode "Flydigi 2.4G Android"

I can do that. So, to mimick moving the right stick in a circular motion, enhancing aim assist, i could make a combo RU 4, RR, 4, RD, -4, RL -4, RU 4, RL -4, RU 4, RR 4 and this should be on a turbo so it is continuous. But the way it is now, I'd have to wipe out L2 all together or make a super long combo with L2 before everything in said combo.

[vain]

Hey there!

Which connection type do you use? Please note that Apex 1 could be used with an official dongle only in reWASD. Do you use it or something else?

The only way to connect computer to the Apex1 is with the official dongle, no need to wonder.
Apex1 is working fine in 360 mode. After switching to Android mode, reWASD does not show the device. Already check blacklist.

[Knight_Breaker]

Glad to see ARM support, that's one step closer to being able to also support other OSs. Well done!

[reWASDer]

Unrecognizable Flydigi Apex 1 for Android mode "Flydigi 2.4G Android"

Hey there!

Which connection type do you use? Please note that Apex 1 could be used with an official dongle only in reWASD. Do you use it or something else?