Xbox Elite Wireless Controller Series 2

[Edensan]

Message Key name (internal table by scanCode+flags.LLKHF_EXTENDED) VKey MakeCode Flags ExtraInformation Reserved GetKeyNameText(MakeCode+RI_KEY_E0) hDevice
============
WM_KEYDOWN F7 0x76 VK_F7 0x0041 0x0000 0x00000000 0x0000 F7 0x00010047
WM_KEYDOWN F8 0x77 VK_F8 0x0042 0x0000 0x00000000 0x0000 F8 0x00010047
WM_KEYDOWN F7 0x76 VK_F7 0x0041 0x0000 0x00000000 0x0000 F7 0x00010047
WM_KEYDOWN F8 0x77 VK_F8 0x0042 0x0000 0x00000000 0x0000 F8 0x00010047
WM_KEYDOWN F7 0x76 VK_F7 0x0041 0x0000 0x00000000 0x0000 F7 0x00010047
WM_KEYDOWN F8 0x77 VK_F8 0x0042 0x0000 0x00000000 0x0000 F8 0x00010047
WM_KEYDOWN F7 0x76 VK_F7 0x0041 0x0000 0x00000000 0x0000 F7 0x00010047

usButtonFlags usButtonData ulRawButtons usFlags lLastY lLastX ulExtraInformation hDevice
============
0x0004 RIGHT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x0001003B
0x0001 LEFT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x0001003B
0x0004 RIGHT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x0001003B
0x0001 LEFT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x0001003B
0x0004 RIGHT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x0001003B
0x0001 LEFT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x0001003B
0x0001 LEFT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x00010039
0x0001 LEFT_BUTTON_DOWN 0x0000 0x00000000 0x0000 0 0 0x00000000 0x00010039

It seems that the controller has 2 hDevice, is that possible?
0x00010047 and 0x0001003B... (0x00010039 is my mouse)

[Star-Lord]

Hello,

Sent you a private message, please look at messages tab.

[Edensan]

OK found my issue, for anyone having a similar problem in the future, it might be that you've downloaded one of the config from the website that had the triggers bound to mouse clicks, which for some reason I could not find and disable in reWASD.

Eventually what solved the issue was just wiping all the configs, creating a new blank config and just setting it up manually as I should have done originally...

Should have done that from the beginning haha... Oh well, now all is good!

[Necropants]

Thanks for the update. In my case I only really at this stage want to restore the Gamepads functionality because I cannot use the Xbox app. However in Jedi fallen order it appears to be ignoring my remappings in REwasd. Is there still a problem using the Xbox wireless connector?

[reWASDer]

Please check the physical Slot you are using now and Xbox app settings.

There are two possible solutions:
1. Switch to the physical Slot 0 (you won't see any lights on the controller's slot switcher in this case)
2. Go to Xbox app and create a new empty profile in which paddles are Unmapped. Save it to all the slots.

Then, please re-apply reWASD config and try again.

[Necropants]

Thanks for that I worked it out to just not use the profiles before I saw these posts but now I have a new problem, whenever I try to reconnect the controller I get this error. (screen attached.)

[Star-Lord]

Hello,
May I ask you to send us msinfo of your Windows OS. Press win+r - >type msinfo32 - > safe the file.

[Necropants]

Hi star-Lord. Tried to send this but it's over 3 meg and the forum won't let me upload.

[Star-Lord]

Hello,

Please send the msinfo official support center this address support-eml@disc-soft.com

Thank you.