How to add modifier function to Xbox Elite 2 controller?

[ProfessorTenebrae]

This is the forum post that solves it using the virtual controller, but this user is using the keyboard.

https://forum.rewasd.com/forum/rewasd/technical-questions-aa/218696-slow-walk-kb-keybind-toggle

[ProfessorTenebrae]

You're still not getting it I don't think...

I know you can move them by both axes, but that isn't the issue. The issue is I want the maximum possible value, to be reduced.
If I push the control stick all the way forward, the resulting output value is 1.
If I push the control stick all the way forward modified, the maximum possible value should be less than that. Like 0.5 if I want 50% of the total output.

All moving the points forward does, is change how far forward I have to push the stick to get it to output 1.

Here is my current 'curve':



But all this does is result in this:

https://imgur.com/a/FGiQJta

What I want is shown quite clearly in Dolphin, where the gray dot shows the point where the analog stick is, but the red dot shows the actual output.

https://imgur.com/a/gYJJ7LX

This use is quite important in things like Super Smash Bros. Melee, where changing to a lower max value allows for walking and certain tilts and directionals.

[reWASDer]

You have four points there — and only those ones could be moved. However, you can move them by both axes. Here is how to get the same curve: https://recordit.co/M5epe77hlm

[ProfessorTenebrae]

This doesn't help, this just seems to affect how smooth the movement is once moving the stick. I'm talking about reducing the maximum value. I can't edit that final value on that curve to be lower than the default. Notice in the attached image from my settings how I can't change the lowest and highest point. I'm looking for something like the red line that I drew.

[reWASDer]

Hello!

Please open the Advanced settings of the Left Stick while you are in Shift Layer 1 and check the Response curve. You need to lower the upper point and adjust the other points to make the movement smooth. It will be something like this:

[ProfessorTenebrae]

I'm currently trying to add a modifier to one of the back paddles of the Elite 2 controller.

What I want to happen is, when I use the left control stick it works as normal, but when I hold down the paddle, I want the left control stick to have a smaller maximum value, for walking or slow aiming in games.

Currently, I have it so when I hold down the paddle it shifts to another layer, which works fine. But I'm not entirely sure how to actually apply a deflection or reduction of the control stick value for a physical controller. I know you can do it for the virtual controller, but not how to do it for the physical one.

Thanks!